EVOLVEO 12R1, PWM, 6pin, 12V, RGB ventilátor 120mm

It can display all seven colours of the rainbow. The EVOLVEO 12R1 must be paired with one of the following devices:

You need to buy the compatible EVOLVEO A1 cable for the ventilator, supported by most motherboards that work with RGB ventilators. GIGABYTE with SW RGB Fusion, MSI with SW Mystic Light Sync, ASUS with SW AURA, ASRock with SW RGB LED, etc. Users who do not have a motherboard supporting RGB ventilators need to buy the EVOLVEO C2 sequencer, which also allows remote control.

CONNECTED USING THE EVOLVEO A1 CABLE

EVOLVEO 12R1 12V can be plugged in together with the EVOLVEO 25S1 12 V strip. The EVOLVEO A1 cable allows you to connect up to 4 RGB devices and is compatible with motherboards that have RGB 12 V 4-pin connectors.

CONNECTED USING THE EVOLVEO C2 SEQUENCER

The EVOLVEO C2 replaces regular strip control through the motherboard. The C2 sequencer can be connected to as many as 10 EVOLVEO RGB devices with 6-pin connectors. The ventilator can be connected together with an EVOLVEO 25S1 strip. The effects can be controlled in three ways:

• with a remote control – ventilator rotation speed, switching between light effects, and light-effect speed
• with the three push-buttons on the sequencer – ventilator rotation speed, switching between light effects, light-effect speed
• by connecting the sequencer to your PC’s RESET button – switching between light effects

Specifications:

• 18x RGB LED
• 7 colours: blue, light blue, red, green, yellow, white, pink
• 12 colour effects
• automatic merging and switching between colours
• breathing (continuous dimming and lighting) of a single colour
• breathing with automatic switching to other colours
• breathing with a slow splitting of the ray and transition to other colours
• bearing: rifle
• rotation speed: max. 1,200 RPM
• air flow: max. 32 CFM
• noise level 15 dB
• PWM (for connecting to EVOLVEO C2)
• dimensions: 120 x 120 x 26 mm