EVOLVEO RoboTrex H6, robotic vacuum cleaner (wet mopping function and charging station)

BLDC motor, mopping feature, HEPA filter, 2600 mAh Li-ion battery, up to 110 minutes running time, 20 W suction power, noise intensity below 65 dB, postponed start feature, remote control with an LED display

Delivery to:
20.10.2021
In stock (> 5 pcs)
Code: RTX-H6
€189
Category: Robotic vacuum cleaners
EAN: 8594161338659
Obj.kód: ROB RTX-H6

Robotic vacuum cleaner with a mopping feature

Three mechanical push-buttons for easy operation

The vacuum cleaner’s control panel allows you to start automatic cleaning, spiral cleaning, or return it to the charging station without looking for the remote control.

Perfect wet cleaning

The vacuum cleaner has a mopping feature using a microfibre mop and a 250 ml water container.

Two brushes for perfect cleaning

With the side brush, Robotrex H6 can clean even narrow places around furniture, along walls, in corners, and other hard-to-reach spots. Two counter-rotating brushes in the robot’s head very effectively collect both dust and larger impurities from the floor.

Modern BLDC motor

The high-performance BLDC motor achieves up to a third longer service life and is more reliable, quieter and more efficient than classic motors used by competing products.

Two suction modes

The standard vacuuming mode can be switched on the remote control to maximum power to clean very dirty spaces even more effectively.

High-capacity battery

Thanks to its high-capacity 2600 mAh Li-ion battery, the RoboTrex H6 can work much longer than other vacuum cleaners. It is one of the most advanced batteries, and so does not require formatting. The vacuum cleaner is equipped with special technology that protects the battery from overcharging. After it finishes cleaning, the robot will automatically return to the charging station and start charging up.

HEPA filtration

The HEPA filter helps capture fine dust, allergenic mites, and animal allergens. It also prevents small particles from escaping back into the air. Maintaining the vacuum cleaner is simple and you do not need any disposable paper bags.

• three mechanical push-buttons for easy control
• modern 20 W BLDC motor with a long service life
• mopping with an XXL mop
• dry sweeping with a XXL mop to remove fine dust
• 2600 mAh high-capacity Li-ion battery
• height only 70 mm
• up to 110 minutes per charge
• automatic charging at a charging station
• quiet operation (below 62 db)
• automatically adapts to different floor surfaces (floating, tiled, linoleum, low pile carpets)
• infrared remote control with an LED display
• anti-fall and anti-scratch sensors
• postponed start feature
• two-level filtration: primary filter + HEPA filter for fine dust and impurities
• rich range of accessories included in the package

• no paper bags
• easy maintenance
• fast activation and start
• 4 cleaning programmes – automatic, perimeter, circular and postponed start
• two extra-long brushes for corners
• 0.3 l dust container
• 10 infrared anti-collision sensors
• 3 infrared anti-fall sensors
• diameter 300 mm
• height 70 mm
• weight 2 kg

Package includes

• EVOLVEO RoboTrex H6
• water container for wet mopping (250 ml)
• dust container for vacuuming (300 ml)
• infrared remote control with an LED display
• 2 batteries for the remote control
• charging station
• 230 V power source
• HEPA filter
• microfibre mopping module, XXL size
• replacement mopping microfibre cloth, XXL size
• 2 replacement side brushes
• small cleaning brush
• user manual

 

 

Add a comment
Do not fill out this field:
E Avatar of author Obstacle 18.9.2020 14:42
Hi, how high can a threshold be for the vacuum cleaner to cross it? My thresholds are 2 cm high. Thank you.
E Avatar of author Obstacle 18.9.2020 15:06
Hello, the maximum threshold height for the vacuum cleaner is 2 cm, anything lower will be no problem.
E Avatar of author The vacuum cleaner is not moving 18.9.2020 14:41
The vacuum cleaner does not leave the charging station. Nor does it flash. What’s up with it?
E Avatar of author The vacuum cleaner is not moving 18.9.2020 15:05
Hello, please check whether the switch is in the ON position.

Be the first who will post an article to this item!

Do not fill out this field: